EXAMPLES OF TOTAL ROOF RE-COVERING COSTS ~ For an estimate see Price Estimator section.
Self-Adhesive System Self-Adhesive EPDM rubber sheeting is sold by the roll or part roll cut to the nearest ½ metre at:-
~ only £16.65 / sq m*(for full rolls, part rolls incur a cutting charge of £12.50) Example:- Small roof 5.0m x 2m (including edge allowances for drips) would cost:
For the rubber 5.0m x 2m = 10.0 sq m = 1 roll x £166.50/roll
£166.50
Primer to suit = 2.5 kg tin @ £30.00/tin
£30.00
Only
£196.50
[If ballasted with pebbles it would only cost £166.50!]
Example:- Large roof 10m x 3m (including edge allowances for drips, etc) would cost:
For the rubber 10.0m x 3m = 30.0 sq m = 3 roll x £166.50/roll
£499.50
Primer to suit = 4.5 + 2.5 + 1.0 litre tins = 30.2 sq m coverage =
£ 94.20
Only
£593.70
Trial Pack ~1 square metre of rubber (either 1x1m or .333x3m) + 0.5 kg primer for £45 including delivery and VAT
One Piece System One piece EPDM rubber sheeting is sold by the relevant roll width and by the running metre to the nearest 0.1 metre from:-“
~ only £8.52 / sq m*( approximately ½ the Self-Adhesive System cost)
Example:- Small roof 6.1m x 2m (including edge allowances for drips) would cost:
For the rubber 6.1m width of roll x 2 running metres x £52.00/running m
£104.00
For 6.1m x 2m deck = 12.2 sq m, suitable Decking Adhesive tin sizes
are 2.5 and 1 litres giving about 15 sq m coverage at a cost of ~
£41.00
Only
£145.00
[If ballasted with pebbles it would only cost £104.00!]
Example:- Large roof 9.1m x 3m (including edge allowances for drips, etc) would cost:
For the rubber 9.1m width of roll x 3 running m @ £85.00/running m
£255.00
For 9.1 x 3m deck = 27.3 sq m, suitable Decking Adhesive tin sizes
are 2.5 and 5 litres giving about 33 sq m coverage at a cost of ~
£82.00
Only
£337.00
ShedCover System
ShedCover EPDM rubber sheeting is sold by the running metre to the nearest 0.1 metre at:- ~ only £5.99 / sq m* ( approximately 63% the One Piece System cost)
Example:- Large shed roof 6m x 3m(including edge allowances for drips and laps) would cost:
For the rubber one piece 6.0 m wide x 3 running m x £5.99/sq m
£107.82
For joining 2m (25m roll) joining tape
£3.00
For 6m x 3m deck = 18 sq m, suitable Decking Adhesive tin sizes are 5 litres giving about 22 sq m coverage at a cost of
£54.00
Only
£161.82
[If ballasted with pebbles it would only cost £107.82!]
COST COMPARISONS per sq metre
Typical Polycarbonate (clear twin wall) costs
£14.95
Typical Costs for just a double coat of roof sealing resin
£13.98
Typical Self-Adhesive roofing felts for the system
£12.63
Typical One Piece EPDM by DIY Roofing for the system
£11.89
Typical ShedCover EPDM by DIY Roofing for the system
£ 8.99
*Rubber only excludes primer/adhesive, delivery and VAT